Version 2.2

Release Notes for Software Version 2.2

New and Changed Features

HR Record

Event 13894: HR Record – Leavers

The process performed by the Leavers wizard, when an employee’s status is changed to Left, has been enhanced.

The salary held on the HR record for the employee is set to zero and any fixed payment records of types Automatic or Entered have their end period set to the period during which the employee left.

This resolves problems that can arise when an employee rejoins the company.

Event 13902: Employment – Salary History

In the Salary History window (HR Record > Employment > Salary History), you can link an employment history record to a salary history record. On the Other tab, the Activity drop-down list from which you can select the activity has been enhanced to make selection easier. It now shows the start date of the employment history record.

Event 13962: Employment – Organisation Structure

The employee name and job title are now included and these are used as the display items in the organisational structure displayed using Microsoft Visio.

Event 13987: HR Record – Select Employee

When you search for an employee, when you use Find or Fast Find by using an employee’s surname, an enhancement has been made so that the employee’s previous name fields are also checked.

Event 13998: Payroll Details – General Ledger

In the General Ledger window, the software has been enhanced to allow a percentage to be entered as a negative value, which can then be assigned to a particular general ledger code. You can view general ledger records by clicking HR Record > Payroll Details > General Ledger. To display the details for a record, select a record and click the View button.The General Ledger window is displayed.

The total of all the percentages must equal 100%.

Event 14010: HR Record – Icons

The HR Record icons have been removed and replaced with dots.

Event 14012: Payroll Details – Working File

For payroll codes where Type of Code is set to Value, the value assigned to the payroll code in the working file now defaults, firstly, to any value set against that code in Value field in the Fixed Payments / Deductions window (HR Record > Payroll Details > Fixed Payments / Deductions), and then to any value set in the Value field on the Defaults tab of the Payment/Deduction window (Payroll > Module Setup > Payment/Deduction > Defaults). Any date-effective calculation that is relevant is applied.

Event 14035: Payroll Details – Details

On the Other Controls tab of the HR Record window (HR Record > Payroll Details > Details), when the tax code is 0T (as confirmed on the NI & PAYE tab, where Code is 0 and Suffix is T) and P45 / P46 Type is set to P46 [Starters], the default for the P46 Statement field is C – I have another job or receive a state or occupational pension.

Event 14056: Payroll Details – Working File

The length of the Description field in the PAYINPDET and PAYAUDDET tables has been increased to 100 characters. This means you can now enter up to 100 characters in the Description field in the Working File window (click HR Record > Payroll Details > Working File, select a payment/deduction, and click the Edit or View button to see the window’s details).

For more information about the Working File window, refer to Working File.

Occupational Sick

Event 13885: Occupational Sick Schemes

You can now specify payroll codes on the Progression tab of the Occupational Sick Scheme window that use Working Days Specific as a parameter in React to Critical Dates for the payroll code, to ensure that any payments are prorated based on the particular working pattern for an employee.

For more information about the Progression tab of the Occupational Sick Scheme window, refer to Progression.

For more information about the Occupational Sick submodule, refer to Occupational Sick: Overview.

For more information about setting Working Days Specific as a value for the React to Critical Dates date-effective parameter on the Controls tab for a payroll code, click here.

For information about how to set up and use Occupational Sick, refer to the help topics under Set up and use Occupational Sick in the How to … section of the Online Help menu.

Event 14037: Duration Type

Specific Working Pattern has been added as an option for the duration type for an occupational sickness scheme.

For more information, refer to information about the Duration Type field in the help topic about the Scheme tab for an occupational sickness scheme.

Event 14041: Occupational Sick Payment Calculations

The caclulation for the number of days used in the allowances defined in an occupational sick scheme now includes the option Working Days Specific, which uses the specific working patterns defined for employees.

For more information, refer to the help topics referred to in the descriptions for events 13885 and 14037.

Payroll

Event 13865: All Templates can be Included in Enhanced P35 Report

You can now select all, or some, of your templates for the P35 report. A new page, page 5, has been added to the payroll report wizard.

To view and use this updated wizard, click Payroll > Reports > Pre-Printed Stationery > Year End Returns.

For more information, refer to Year End Returns.

Event 13873: Suspense Account Report

The suspense account report has been enhanced to record the original GEN code. When you run the report, the GEN code passed through will be the original value rather than the suspense code.

To use this report, click Payroll > Financial Analysis > Suspense Account List.

Event 13888: Enhanced Child Care Wizard

On page five of this wizard, you can now select a start date and start year/period.

To use this wizard, click Payroll > Functions > Child Care.

For more information about this wizard, refer to Child Care.

Event 13943: Payment/Deduction – GEN tab – Project

A Project check box and a Default Project field have been added to the GEN tab for the settings of a payment/deduction. When you select Project, you can specify a default project in Default Project.

Project codes are for use in a future release.

Event 13944: New Table – PAYPROJECTS

Related to event 13943. A new table has been added: PAYPROJECTS. This table holds the projects you can select in Default Project on the GEN tab of the payroll code.

Project codes are for use in a future release.

Event 13945: Working File

Related to events 13943 and 13944. A new field, Projects, is displayed in the Working File window for you to select the project.

Project codes are for use in a future release.

Event 13947: General Ledger

Related to events 13943, 13944, and 13945. When you enter general ledger details for a payment/deduction, you can enter a project code.

Project codes are for use in a future release.

Event 13999: Analysis Reports – Payroll Journal

The Payroll Journal report now contains entries on the deduction side of the report of the reclaims/compensations for SMP, SPP, SAP, and ASPP, if an appropriate rate has been recorded. The rates are either recorded against the template definition (click Payroll > Module Setup > Template > Tax, and refer to the Rebates fields) or against the payroll codes SMPR, SPPR, SAPR, and ASPPR (click Payroll > Module Setup > Payment/Deduction, select the payroll code, and click the View button to view its details).

To start the wizard to view this type of report, click Payroll > Analysis Reports > Payroll Journal.

Event 14009: Module Setup – Payment Deduction – Defaults

Values entered in the Upper Limit and Lower Limit on the Defaults tab of the settings for a payroll code are now actioned by the calculation process when the Limit Type is set to Value – Mandatory. For example, if Upper Limit is set to 2000 and Lower Limit is set to 900, any values above £2000 are replaced with a value of £2000 and any values below £900 are replaced with a value of £900.

You should check your payroll codes, where Type of Code is Automatic. If any of them have the Limit Type set to Value – Mandatory, ensure the values entered are what you require.

Event 14023: Functions – Government Gateway Imports

The Government Gateway Imports function (Payroll > Functions > Government Gateway Imports) no longer brings multiple tax codes for an employee into Authorisation Centre (System Setup > Authorisation Centre > Workbench). It now supplies only the most recently issued tax code for each employee, at the start of the tax year.  Any codes that might have been issued for the previous tax year, or have been superseded by a correcting code, are not brought into Authorisation Centre.

HMRC instructions state that you must keep and use the form P9(T) or other tax code notification with the most recent date for each employee. You should scrap any P9(T) or other tax code notification for the same employee with an earlier date.

Event 14032: Functions – Government Gateway Imports

The Government Gateway Imports function (Payroll > Functions > Government Gateway Imports) now makes available extra details for authorisation in Authorisation Centre (System Setup > Authorisation Centre > Workbench). The extra data available is: Week1Month1 setting, previous employment pay to date, and previous employment tax paid to date.

Event 14036: Payroll – Functions – Child Care

The restriction that a second child care entry could not be made for an employee for whom a previous entry existed in the fixed input file, has been removed. A restriction is now in place that a second child care entry cannot be made if a previous entry is still being paid in the current or future periods.

Event 14136: Payroll – GEN Code Detail – Export to File
Problem

An error was found in the Export to File option of the export process, which caused a system error when the number of records exported was very large, exceeding 33000.

Solution

This has been resolved.

Personnel

Event 13867: Your Organisation – Activity

There is a new button on the Activity window, called Archive. Two fields have also been added: Active From and Active To.

Use the Active From and Active To fields to record when the activity was live in the system. Active From records when the activity became active and Active To records when the activity ended.

Click the Archive button to copy the activity detail record to an archive file. This button is available only when you amend activity details. You can then amend the original record to reflect the current situation. The current and archived records are available in the Establishment report. To run the Establishment report wizard, click Personnel > Analysis > Establishment.

To view the Activity window, click Personnel > Your Organisation > Activity, select an activity, and click the Edit button. The Activity window is displayed. Before you click the Archive button to run the archive function, you must specify dates in the Active From and Active To fields.

Event 13984: Analysis – Establishment

Related to event 13867.In the Establishment report, when obtaining activity details for the report, the new Job History file is checked to see if the activity exists there, with active dates that would require its inclusion in the report.

To run the Establishment report wizard, click Personnel > Analysis > Establishment.

Event 14039: Personnel — Terms and Conditions – Working Pattern

In the definition for a working pattern, on the Type tab, an Include Non Working Days check box has been added, to enable you to specify whether the system should include non-working days. This check box is selected by default, for new and existing working pattern definitions. If you clear this check box, when the system checks the working pattern to see if a specified date is a working day, the system does not check the non-working days specified either in the working pattern or the system definition parameters.

Staff Development

Event 13899: Setup – Training Course – Rules

Two new fields have been added to the Training Course window.

To view this window, click Staff Development > Setup > Training Course, select a training course, click the Edit button to view the details, and click the Rules tab.

The two new fields are the Auto Assign check box and Asign Based On. They control whether the system automatically attempts to put an employee on an event at the point a training need is entered on the system. Use Auto Assign to indicate whether automatic assignment should be attempted. In Asign Based On, select a diary rule to check the events. At the point when the training need is entered, the diary rule is added to the system date. Only events that start after this date are considered. The Asign Based On field therefore defines a diary rule that specifies the lead time required between a need being entered and an event for this course being run for the allocation process to take place. This is to stop the employee being automatically assigned to a training event that might start the very next day, therefore not allowing time for preparation.

If Auto Assign is selected for the course, when a training need is entered the system checks existing training events for the specified course. If the event has not reached the attendee limit, starts before the training need requirement date, and also meets the diary rule requirement against the course, the employee is attached to the event as an attendee. In the Training Needs window (HR Record  > Credentials > Training Needs), when a training need is entered in the system, a check is made against the training course to see if automatic assignment has been set against that course. If the Auto Assign checkbox is selected, a check is made on events for that course. The system looks for an event that fits the following criteria:

  • Its Start Date must be after the date on which the need is entered, modified by the diary rule set against the training course.
  • Its Start Date must be before the Due by Date.
  • The attendee limit for the event must not be exceeded.

If these checks are met, the employee is placed on the event, the training need record is updated to indicate On Event and the event number is assigned to the need record.

System Setup

Event 14032: Functions – Government Gateway Imports

The Government Gateway Imports function (Payroll > Functions > Government Gateway Imports) now makes available extra details for authorisation in Authorisation Centre (System Setup > Authorisation Centre > Workbench). The extra data available is: Week1Month1 setting, previous employment pay to date, and previous employment tax paid to date.

Event 14084: System Definitions – Employment

A new checkbox, Accumulate Hours on HR Record, has been added to the Employment tab of System Definitions. To find it, click System Setup > Housekeeping > System Definitions > Employment.

Alongside the new checkbox is a new button, Apply. Select this button to update the employee’s employment terms hours to be from the relevant employment history records.

If the Accumulate Hours on HR Record checkbox is clear (not selected), the value shown in the Hours Per Week field in the Terms window (HR Record > Employment > Terms) is the same as that shown in the employee’s employment history primary active record. If the checkbox is selected, the Hours Per Week field in the Terms window displays the total of the hours on the employee’s primary active and active employment history records. To view the primary active employment history record for an employee, click HR Record > Employment > Employment History, and under Status, select the Primary Active record, and click the View button.